View TX-3090-AAB-13SX_459020.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TX-309
Hi-Rel Temperature Compensated Crystal Oscillator
TX-309
Features
* * * * Radiation Tolerant Small footprint Frequency Range: 0.3 MHZ to 150 MHZ Previous Model: C2501
Applications
* Reference clock for space and satellite * Military airborne and mobile systems
Performance Speci cations
Parameter
vs. operating temperature range (referenced to +25C)
Min
-10 -4 -2 -1 -1 -5 -1
Typ
Max
+10 +4 +2 +1 +1 +5 +1
Units
1
Condition
-55... +105C -40... +85C -20... +70C 0... +50C
Frequency Stabilities
ppm ppm ppm ppm ppm ppm ppb/sec
vs. aging / 1 year vs. aging / 10 years Short Term Stability
Supply Voltage (Vs)
Supply voltage Supply voltage Supply voltage Current 14.25 4.75 3.135 15.0 5.0 3.3 15.75 5.25 3.465 50 35 VDC VDC VDC mA mA ACMOS output Sinewave output
RF Output
Signal Duty Cycle Rise\Fall time Logic Level "0" Logic Level "1" Vcc -0.5V 40 CMOS 60 +5 +0.5 % ns V V (10% to 90%) with 2CMOS Loads
Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com
Performance Speci cations
Parameter
Signal Output Power Harmonics Sub-Harmonics Spurious +7 +3 -20 -20 -70
Min
Typ
Max
Units
dBm dBm dBc dBc dBc
Condition
Sinewave standard (>75 MHz) (>75 MHz)
Frequency Tuning (EFC)
Tuning Slope Phase Noise (10MHz) Sufficient to tune to nominal frequency for 10 years
Additional Parameters
-95 -125 -145 -150 -150 -75 -105 -135 -145 -145 30 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz g 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz
Phase Noise (>75MHz)
Weight
Absolute Maximum Ratings
Supply voltage (Vs) DC Input Current Lead Temperature (Soldering, 10 seconds) Operable temperature range Storage temperature range Sine Vibration Random Vibration Shock Acceleration Altitude -55 -62 -0.5 -0.5 +7.0 +20 +50 300 +125 +125 V V mA C C C (ACMOS) (Sinewave)
Environmental Characteristics
Mil-STD-202, Method 204, TC "D" Mil-STD-202, Method 214 TC "I-K" (15 minutes per axis) Mil-STD-202, Method 213, TC "F" Mil-STD-883, Method 2001, TC "A" 50,000 feet minimum to deep space Radiation testing is not performed at the oscillator level, but these TCXOs have been acceptable for use in environments of up to 100K rads total dose, by analysis of the components used. The TTL Output TCXOs are assembled with all bipolar semiconductors. The CMOS Output TCXOs are assembled with all bipolar semiconductors with the exception of the ACMOS chip used to provide the CMOS output. A CMOS chip that is from a radation tested, certi ed wafer lot can be provided if speci ed on the Purchase Order. A copy of the parts list and materials can be provided for customer review.
Radiation
Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com
Performance Speci cations
Parameter Min Typ Max Units Condition
Manufacturing Information
QUARTZ CRYSTAL For the ight models, swept quartz shall be used in the manufacture of the crystals. For the Engineering models, non-swept quartz shall be used. TRAVELLERS Travellers or Process Cards are used in the manufacturing and testing of all Hi-Rel TCXOs and are available for customer review. Copies of these Travellers can be provided with the TCXOs at time of shipment if so speci ed on the purchase order. TRACEABILITY and HOMOGENEOUS MATERIAL Option Codes `S' & `R' only Manufacturing lot and date code information shall be recorded, by TCXO serial number, of every component and all materials used in the manufacture of that TCXO. Also all semiconductors used in the manufacture of any given Production Lot of TCXOs, shall be from the wafer and have the same manufacturing lot date code. A Production Lot, as de ned by Corning, is all oscillators that have been kitted and assembled as a single group. After the initial kitting and assembly, this Production Lot may be divided into multiple sublots to facilitate alignment and test capacity and may be sealed at multiple times within a 13 week window. TEST DATA All Test Data is recorded by TCXO serial number. Copies of this data can be provided with the TCXOs at time of shipment if so speci ed on the purchase order. REWORK All rework follows the requirements of Mil-PRF-55310 Class `S' for Option Code `S' and Class `B' for Option Codes `R', `B' and `C'. The only exception is the Select-At-Test components may be replaced up to four times.
Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com
Performance Speci cations
CONSTRUCTION, SCREENING & TESTING OPTIONS
NOTE: For Engineering or Prototype TCXOs requiring basic electrical testing only and no Screening, or Groups `A' and `B' Testing, use the code letter `E'. Operation \ Code Design, Construction & Component Screen (see Mfging Section) Workmanship Screening Non-Destruct Wire Bond Pull Internal Visual Stabilization Bake Thermal Shock Constant Acceleration Seal Test ( ne & gross) PIND "S" Mil-PRF-55310 Class `S' M883, Method 2017 for Class `S' Mil-PRF-55310 Class `S' 100% M883, Method 2017 for Class `S' 48 hrs minimum @ +150C M883, Method 1011, TC `A' M883, Method 2001, TC `A' (5000 gs, Y1 Axis only) 100% M883, Method 2020, TC `B' "R" Mil-PRF-55310 Class `B' M883, Method 2017 for Class `B' Mil-PRF-55310 Class `S' 100% M883, Method 2017 for Class `B' 48 hrs minimum @ +150C M883, Method 1011, TC `A' M883, Method 2001, TC `A' (5000 gs, Y1 Axis only) 100% M883, Method 2020, TC `B' @ +25C only +125C for 240 hours @ +25C & Temp Extremes speci ed in Table II 2% applies to Input Current @ +25C M883, Method 2012 100% 100% "C" Mil-PRF-55310 Class `B' M883, Method 2017 for Class `B' Mil-PRF-55310 Class `B' modi ed N/A M883, Method 2017 for Class `B' 48 hrs minimum @ +150C N/A M883, Method 2001, TC `A' (5000 gs, Y1 Axis only) 100% M883, Method 2020, TC `B' @ +25C only +125C for 160 hours @ +25C & Temp Extremes speci ed in Table II 10% applies to Input Current @ +25C N/A Sample per Mil-PRF-55310 Sample per Mil-PRF-55310 "B" Mil-PRF-55310 Class `B' M883, Method 2017 for Class `B' Mil-PRF-55310 Class `B' N/A M883, Method 2017 for Class `B' 48 hrs minimum @ +150C N/A M883, Method 2001, TC `A' (5000 gs, Y1 Axis only) 100% N/A @ +25C only +125C for 160 hours @ +25C & Temp Extremes speci ed in Table II 10% applies to Input Current @ +25C N/A Sample per Mil-PRF-55310 Sample per Mil-PRF-55310
Electrical Test Frequency, Output levels, Input @ +25C only Current Burn-In (Powered with load) +125C for 240 hours
Electrical Test Frequency, @ +25C & Temp Output levels, Input Extremes speci ed Current in Table II PDA Radiographic Group `A' Group `B' (30 day Aging @ +70C) 2% applies to Input Current @ +25C M883, Method 2012 100% 100%
Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com
Outline Drawing / Enclosure
Dimensions in [inches] mm 1,3,7,12,14
Pin Connections
Ground Supply No Connection External Frequency Control RF Output 2
Type B
Code 0 Height "H" 0.5" Pin Length "L" 0.65"
4,5,9,10,11 6 13
Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com
Ordering Information
TX - 309 0 - D E E - 13S X - 10M0000000
Frequency Product Family TX: TCXO Package 20 x 20 mm Height 0: B0.5" Supply Voltage A: 15 Vdc D: 5 Vdc E: 3.3 Vdc RF Output Code A: CMOS E: Sinewave Temperature Range B: -55C to +105C E: -40C to +85C J: -20C to +70C P: 0C to +50C Platform Code X: Not Used
Platform Code Output Power (1st digit) 0: +3 dBm 1: +7 dBm Stability (2 digit) 0: 1ppm 1: 2ppm 2: 4ppm 3: 10ppm Screening (3 digit) S: Class "S" Level Screening R: Class "S", Class B components C: "C" Class B modi ed B: Class "B" Level Screening E: Engineering Model
Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modi cation. 5. Contact factory for availability.
For Additional Information, Please Contact
USA:
Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328
Europe:
Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30
Asia:
Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Rev: 2/23/2009 daf Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com

▲Up To Search▲

Price & Availability of TX-3090-AAB-13SX

	To Download TX-3090-AAB-13SX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .